RAM 1500 2020 - Tri-Fold Tonneau Cover Cleaning

GETTING TO KNOW YOUR VEHICLE 105
5. Unfold Tonneau Cover to the second panel
position.
NOTE:
The vehicle cannot be driven when the Tonneau
Cover is in this position.
Second Panel Position
6. Completely unfold the Tonneau Cover.
NOTE:
When unfolding the center and rear panels, the
sections MUST be held together to avoid
damage to the cover material.
Incorrect Folding — Will Cause Damage
Correct Folding — Hold Panels Together
NOTE:
Unfold the panel gently. It is not recommended
to allow the panels to drop under their own
weight.
Fully Unfolded Position
7. Repeat steps “2” through “3” for the rear
pair of clamps.
Tri-Fold Tonneau Cover Cleaning
For proper cleaning of the Tonneau Cover, use
Mopar Whitewall & Vinyl Top Cleaner and Mopar
Leather & Vinyl Conditioner/Protectant.
CAUTION!
It is the driver’s responsibility to ensure the
Tonneau Cover is properly installed on the
vehicle. Failure to follow this procedure can
result in detachment of the Tonneau Cover
from the vehicle and/or damage to the vehi-
cle/Tonneau Cover.
2
20_DT_OM_EN_USC_t.book Page 105