424 TECHNICAL SPECIFICATIONS
FLUIDS AND LUBRICANTS — DIESEL ENGINE
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology).
Engine Oil
We recommend you use 5W-40 synthetic engine oil such as Mopar or
Pennzoil Platinum Euro that meets FCA Material Standard MS-12991 and
the API SN engine oil category is required.
Engine Oil Filter
We recommend you use Mopar Engine Oil Filters. Using an oil filter that
does not meet the manufacturers filtration requirements can severely
impact engine life and reliability.
Fuel Filters
We recommend you use Mopar Fuel Filter. Must meet 3 micron rating.
Using a fuel filter that does not meet the manufacturer’s filtration and
water separating requirements can severely impact fuel system life and
reliability.
20_DT_OM_EN_USC_t.book Page 424
To Next Page
Loading...
