98 GETTING TO KNOW YOUR VEHICLE
5. Lock the center handle to secure the panel
into place.
Storage Position
The storage position for the bed divider is at the
front of the truck bed which maximizes the bed
cargo area when not in use.
To install the bed divider into the storage position,
perform the same steps as you would for the
divider position, except position the divider fully
forward in the bed against the front panel.
Storage Position
The outboard ends should be positioned in front of
the cargo tie-down loops.
Cargo Tie-Down Loop
TRI-FOLD TONNEAU COVER — IF EQUIPPED
The Tri-Fold Tonneau Cover can be installed on the
truck bed to protect your gear and cargo.
TONNEAU COVER COMPONENTS
Folded Tonneau Components
1 – Stowage Strap
2 – Tonneau Bumper Folded
22_DT_OM_EN_USC_t.book Page 98
To Next Page
Loading...
