ELECTRIC PARK BRAKE (EPB)
Your vehicle is equipped with an Electric Park
Brake (EPB) that offers simple operation, and
some additional features that make the parking
brake more convenient and useful.
The EPB can be engaged either manually or
automatically within the Uconnect Radio
Settings.
The parking brake switch is located on the instru-
ment panel to the left of the steering wheel
(below the headlamp switch).
To apply the parking brake manually, pull up on
the switch momentarily, the BRAKE telltale light
in the instrument cluster and an indicator on the
switch will illuminate. The parking brake can be
applied even when the ignition switch is OFF but
the BRAKE telltale light will not illuminate, how-
ever, it can only be released when the ignition is
in the ON/RUN position.
NOTE:
•
If your foot is on the brake pedal you may
notice a small amount of brake pedal
movement.
•
The EPB Warning Light will illuminate if the
EPB switch is held for longer than 20 seconds
in either the released or applied position. The
light will extinguish upon releasing the switch.
To manually release the EPB the ignition switch
must be in the ON/RUN position. Place your foot
on the brake pedal, then push the parking brake
switch momentarily. You may hear a slight whir-
ring sound from the back of the vehicle while the
parking brake disengages.
Electric Park Brake Switch
INTERIOR 35
To Next Page
Loading...
