EasyManua.ls Logo

RAM 1500 2024 - Tailgate Operation

RAM 1500 2024
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRAILER CAMERAS
IF EQUIPPED
Trailer Surround View Camera
System If Equipped
The Trailer Surround View Camera system allows
you to see an on-screen image of the surround-
ings and the Top View of a trailer using four
mountable cameras. This occurs whenever the
More Cams button is selected, or when enabled
through the Uconnect system. The image will be
displayed on the Uconnect display along with a
caution note “Check Entire Surroundings”. After
five seconds, this note will disappear.
NOTE:
Trailer Surround View Camera kit is only avail-
able for vehicles equipped with the Surround
View Camera system.
The Trailer Surround View Camera system has
programmable settings that may be selected
through the Uconnect system.
Page 10
Set Up
The Trailer Surround View Camera system
includes an installation kit with a Trailer Surround
View Module and four Trailer Surround View
Cameras that must be installed on your trailer
prior to connecting to your vehicle. See the
installation instructions included with the Trailer
Surround View installation kit for more
information.
Once the Trailer Surround View Module and cam-
eras are installed and the trailer is connected to
the vehicle via the 12-way connector, the Trailer
Surround Camera settings can be accessed. The
Trailer Surround Camera settings can be
accessed through Uconnect Settings by pressing
the Trailer button in the Trailer Settings or the
Camera Settings. The system requires input of
the trailer dimensions prior to use of the system.
NOTE:
If a trailer is connected but the trailer dimen-
sions have not been entered in the Trailer Sur-
round settings page, the system will default to
the settings page.
If a trailer is not connected and any button is
selected, a message will appear: “Connect
Trailer Equipped With Trailer Surround View
System”.
If snow, ice, mud, or any foreign substance
builds up on the camera lenses, clean the
lenses, rinse with water, and dry with a soft
cloth. Do not cover the lenses.
If a malfunction with the system has occurred,
see an authorized dealer.
WARNING!
Drivers must be careful when backing up even
when using the Trailer Surround View Camera.
Always check carefully behind your vehicle, and
be sure to check for pedestrians, animals, other
vehicles, obstructions, or blind spots before
backing up. You are responsible for the safety
of your surroundings and must continue to pay
attention while backing up. Failure to do so can
result in serious injury or death.
CAUTION!
To avoid vehicle damage, Trailer Surround
View should only be used as a parking aid.
The Trailer Surround View Camera is unable to
view every obstacle or object in your drive
path.
To avoid vehicle damage, the vehicle must be
driven slowly when using Trailer Surround
View to be able to stop in time when an
obstacle is seen. It is recommended that the
driver look frequently over his/her shoulder
when using Trailer Surround View.
38 EXTERIOR

Table of Contents

Related product manuals