3. Press and release the RIGHT arrow button to access
the ”Oil Life” screen.
4. Press and release the DOWN arrow button to select
“Reset”, then press and release the Right arrow button
to select reset of the Oil Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine.)
2. Press and release the LEFT arrow then press and
release the DOWN arrow button to scroll downward
through the main menu to “Vehicle Info”.
3. Press and release the RIGHT arrow button to access
the “Vehicle Info” screen then scroll UP or DOWN to
select “Oil Life” .
4. Press and hold the RIGHT arrow button to select
“Reset”, then select “NO” or “YES” by pressing the
RIGHT arrow then press the RIGHT arrow button to
select reset of the Oil Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the Fuel Filter indicator system did not
reset. If necessary, repeat this procedure.
EVIC Messages
• Front Seatbelts Unbuckled
• Driver Seatbelt Unbuckled
• Passenger Seatbelt Unbuckled
4
UNDERSTANDING YOUR INSTRUMENT PANEL 307
To Next Page
Loading...
