142 GETTING TO KNOW YOUR VEHICLE
Bed Rail Tie-Down System
NOTE:
This feature is available for vehicles both equipped, or not
equipped, with a RamBox.
There are two adjustable cleats on each side of the bed that
can be used to assist in securing cargo.
Adjustable Cleats
Each cleat must be located and tightened down in one of the
detents, along either rail, in order to keep cargo properly
secure.
CAUTION!
The maximum load per cleat should not exceed 250 lbs
(113 kg) and the angle of the load on each cleat should
not exceed 45 degrees above horizontal, or damage to the
cleat or cleat rail may occur.
To Next Page
Loading...
