392 SERVICING AND MAINTENANCE
Wiper Blade Removal/Installation
1. Lift the wiper arm to raise the wiper blade off of the
glass, until the wiper arm is in the full up position.
Windshield Wiper Arm And Blade
2. To disengage the wiper blade from the wiper arm, flip
up the locking tab.
Wiper Locking Assembly
3. Tilt the lower end of the wiper blade away from the
arm and with one finger, push the release tab toward
the wiper arm.
Wiper Disengaging
4. Slide the wiper blade down towards the base of the
wiper arm.
CAUTION!
Do not allow the wiper arm to spring back against the
glass without the wiper blade in place or the glass may
be damaged.
1 — Wiper
2 — Locking Tab
3 — Wiper Arm
1 — Wiper
2 — Locking Tab
1 — Locking Tab
2 — Wiper
3 — Release Tab
23_DJD2_OM_EN_USC_t.book Page 392
To Next Page
Loading...
