90 GETTING TO KNOW YOUR VEHICLE
Correct Folding — Hold Panels Together
7. Completely unfold the Tonneau Cover.
Fully Unfolded Position
8. Pull the rear clamp handles down into the Released
Position.
Stowed Position
9. Push clamp wires up and under the flange of box
(or flange of RamBox rail, if equipped) to the Semi
Clamped Position.
Semi Clamped Position
10. Push clamp handles upward to the clamped position
to properly engage the clamps.
Clamped Position
23_DJD2_OM_EN_USC_t.book Page 90
To Next Page
Loading...
