There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
CAUTION!
•
The lug wrench can only be attached to extension
two (2).
•
When attaching the tool to the winch mechanism
be sure the large flared end opening on extension
four (4) is positioned correctly over the winch
mechanism adjusting nut.
•
Damage to the lug wrench, extensions and winch
mechanism may occur from improper tool
assembly.
Assembled For Jack Operation
WARNING!
After using the jack and tools, always reinstall them in
the original carrier and location. While driving you
may experience abrupt stopping, rapid acceleration
or sharp turns. A loose jack, tools, bracket or other
objects in the vehicle may move around with force,
resulting in serious injury.
Jack And Tools Bracket Assembly
Jacking Tools
Assembled For Spare Tire Lowering/Raising
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
Assembled For Jack Operation
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
5 — Jack Driver
252 IN CASE OF EMERGENCY
To Next Page
Loading...
