Uconnect® RH3
Enable Or Disable Clock
1. Press the DISP button for more than two seconds to enable or disable the Clock.
2. When this function is enabled, the display shows the message "CLK ON" and the
clock is displayed whenever the ignition is On, even with the radio Off. In
10 seconds if no radio key is pressed, the display returns to the clock.
3. When this function is disabled, the message "CLK OFF" is displayed on the radio
display.
Equalizer, Balance And Fade
• Adjust Equalizer of bass and treble
• Balance left/right (BALANCE) and front/rear (FADER)
• Strengthen sound (loudness)
Equalization
• Press the AUDIO button for more than two seconds to access equalization: FLAT,
ROCK, CLASSIC, POP, VOCAL, JAZZ, USER or FLAT.
• Pressing AUDIO more than once changes equalization options. If this key is not
pressed again for five seconds or the ROTARY is pressed, the display returns to the
previously selected view and the adjustments made is saved.
ELECTRONICS
25
To Next Page
Loading...
