EasyManua.ls Logo

RAM Promaster 2014 - Jacking and Tire Changing

RAM Promaster 2014
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JACKING AND TIRE CHANGING
Jack Location
The jack and jack tools are stored under the front passenger seat.
Removing The Spare Tire
Remove the spare tire before attempting to jack up the vehicle.
Attach the lug bolt adapter to the winch extension and insert it into the winch
mechanism.
Rotate the wheel wrench handle coun-
terclockwise until the spare tire is on
the ground with enough cable slack to
allow you to pull it out from under the
vehicle.
Pull the spare tire out from under the
vehicle to gain access to the spare tire
retainer.
Remove the retainer nut prior to re-
moving the retainer from the wheel.
Lift the spare tire with one hand and
remove the retainer at the end of the
cable.
NOTE:
The winch mechanism is designed for
use with the winch extension only. Use of
an air wrench or other power tools is not
recommended and can damage the
winch.
WHAT TO DO IN EMERGENCIES
61

Table of Contents

Other manuals for RAM Promaster 2014

Related product manuals