Need help?Do you have a question about the RAMBO R750 and is the answer not in the manual?
General| Frame Material | Aluminum Alloy |
|---|---|
| Brake Type | Hydraulic Disc Brakes |
| Suspension | Front Suspension Fork |
| Motor | 750W |
| Battery | 48V 14Ah |
| Wheel Size | 26" |
| Gears | 7-speed |
| Weight | Approx. 55 lbs (25 kg) |
Explains CAUTION and WARNING symbols and their implications for injury.
Provides crucial advice for initial use and safety checks before the first ride.
Details the importance and process of registering the bike for safety updates.
Covers disc brake specifics, safe usage, and potential hazards like heat and sharpness.
Warns about foot contact with the front wheel and frame/fork integrity issues.
Details checking tire pressure, wheel trueness, and tire condition.
Covers securing wheels, handlebar stem connection, and cable routing.
Explains proper saddle adjustment for fit and ensuring the seat is securely mounted.
Guides on checking lights, reflectors, and frame for damage or unusual noises.
Alerts to potential component failure due to fatigue, stress, and wear over time.
Outlines crucial rules like wearing helmets, using signals, and obeying traffic laws.
Covers safety for wet weather, night riding, and poor visibility.
Warns against distractions, stunts, and riding under the influence.
Advises on managing speed and exercising caution when riding off-road.
Details safety measures for remote riding, including communication and supplies.
Emphasizes following local rules, respecting private property, and minimizing environmental impact.
Explains how to use both front and rear brakes for safe stopping.
Details how to use shifters for changing gears and avoiding chain issues.
Outlines tasks for before/after rides, monthly, and every 3 months.
Advises on when to seek professional help for maintenance or repairs.
Lists necessary tools and guides on unpacking the bike and its components.
Instructs on finding and recording the bike's serial number for registration.
Details how to properly adjust and secure the quick release skewer for the front wheel.
Covers installing the wheel, checking for caliper binding, and ensuring proper alignment.
Guides on installing the handlebar into the stem and tightening bolts to the correct torque.
Advises on positioning brake and shifter controls at a 45-degree angle for optimal use.
Explains how to insert the seat post, ensuring the minimum mark is hidden, and adjust height.
Details aligning the saddle with the frame and securely closing the quick release lever.
Guides on identifying left/right pedals and correctly installing them into the crank arms.
Explains how to install the battery onto the frame and the process for charging it.
Details installing the brake rotor and mounting the front and rear calipers to the frame/fork.
Guides on routing brake cables and aligning the calipers with the rotor for optimal performance.
Explains how to adjust brake pads, perform break-in, and clean the system.
Covers adjusting cable slack, spring tension, and replacing worn brake pads.
Provides steps to adjust the rear derailleur for common shifting problems.
Explains the display's interface, buttons, and basic functions like ON/OFF and backlight.
Details how to navigate through speed, distance, time, and capacity displays.
Covers the walking assist feature and how to interpret error codes displayed on the controller.
Covers setting units, speed limits, backlight, and time on the display.
Details advanced settings like wheel size and sleep time interval for the controller.
Explains how to set the electric assist level from 2 to 9.
Lists and defines various error codes that may appear on the display.
Outlines the warranty period, what is covered, and the exclusive remedy for defects.
Details conditions that void the warranty and warranties that are excluded.
Addresses limitations on damages, governing law, and the overall agreement terms.
To Next Page
