Ramsey Electronics COM 3 - Page 3

Section 1 -
CONTENTS
General Information
Introduction
Specifications
Options
Special Modifications
Installation
Introduction
Unpacking and Inspection
Power Requirements
Enviromental Considerations
Operation
Introduction
Front Panel Description
Initial Turn On
Generate RF
RF Output Level
FM Modulation
AM Modulation
CTS Tone Generation
1 KHz Internal Tone
External Source Input
Combining CTS and Internal/External
Tone Sources
Offset+ / Offset-
500 Hz Step
Storing/Recalling Test Setups
Spurious Signals
Leakage
Audio Count Off Air
Audio Count External
RF Count
Typical Test Setups
Introduction
Frequency Counter : Off Air
Frequency Counter : Direct Connection
Frequency / Deviation Measurements
20 dB Quieting Measurement
12dB Sinad Measurement