Need help?Do you have a question about the Rand McNally DashCam 300 and is the answer not in the manual?
General| Video Resolution | 1080p |
|---|---|
| Field of View | 140 degrees |
| Wi-Fi | Yes |
| GPS | Yes |
| Display Size | 2.7 inches |
| Viewing Angle | 140 degrees |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Memory Card Type | MicroSD |
| Screen Size | 2.7 inches |
| Night Vision | Yes |
| Storage | Up to 32GB |
| Battery | Built-in rechargeable lithium-ion battery |
Press and hold to turn device on/off; also protects microSD card files from deletion.
Button to manually turn the dash cam on or off.
Buttons for starting/stopping video recording or taking photos.
Plug charger into dash cam's mini USB port and vehicle's charging port.
Instructions for manually turning the device on and off.
Navigate to FORMAT, select YES, and initiate the formatting process.
Caution: Formatting erases all data; back up important files first.
Adjust settings to ensure the dash cam automatically records when the vehicle is on.
Press the designated button to capture a still photo.
Instructions for starting and stopping video recording manually.
Detects impacts to start protected video recording.
Adjust sensitivity from 1 (most sensitive) to 7 (least sensitive).
Navigate menu to G_SENSOR SET and select desired sensitivity.
Records impact events for 30 seconds even when the vehicle is off.
Access menu to select PARKING MODE and desired sensitivity level.
Records video only when the vehicle is detected as moving.
Records video continuously, overwriting oldest unprotected files.
Impact recordings are automatically protected from being overwritten.
Steps to protect photos/videos, indicated by a yellow lock icon.
Press 'M' during recording to protect the current video segment.
Steps to confirm deletion of single files or all files.
To Next Page
