Randell PH120E2 - Replacement Parts List

24
2424
24 800-621-8560
Replacement
Parts List
Pizza Hut Maketables
PH120E2/PH120E2.1
ITEM DESCRIPTION PART #
1 Hood Only PH HOD0101
2 Lid for Rail Hood, 38” x 13 ½” PH HOD038
3 Removable Nosing and Work Surface PH NOS001
4 Door with handle, right hinged 23 ¾” x 24 ½” RP DOR24PHR
5 Door with handle, left hinged 23 ¾” x 24 ½” RP DOR24PHL
6 Door Handle, 10" x 2” RP HDL037
7 Caster, 6” Overall with locking mechanism HD CST060
7A Caster, 6” Overall without locking mechanism HD CST061
8 Access Panel RP PNL0517
9 Hinge Assembly for Right Hinging RP HNG9901
10 Hinge Assembly for Left Hinging RP HNG9902
11 Door Gasket IN GSK1010
12 Door Hinge Bushing HD BSH050
13 Shelf Holding Pin HD PIN0102
14 Wire Shelf, 19 1/8” x 25 ¼” HD SHL060
15 Bracket for shelf support RP BRK0107
16 Fan Register, Back RP REG0508
16A Fan Register, Back, One Piece (PH120E2.1 only) RP REG0702
17 Evaporator Coil, 53"x4"x1" RF COI0002
18 Drain Screen, 2” RP DSN002
19 Evaporator Fan Motor, Rail EL MTR0101
20 Fan Mounting Box RP BRK0501
21 Left Duct Box (PH120E2 only) RP DCT0501
21A Center Duct Box (PH120E2 only) RP DCT0500
21B Right Duct Box (PH120E2 only) RP DCT0502
21C Duct Box – interchangeable (PH120E2.1 only) RP DCT0801
22 Fan Register, Front Right (PH120E2 only) RP REG0506
22B Fan Register, Front Left (PH120E2 only) RP REG0507
22C Fan register, One Piece (PH120E2.1 only) RP REG0701
23 Sauce Pan Insert PH PAN0101
24 Adaptor Bar 6 ¼” PH BAR625
25 Adaptor Bar 10 ½” PH BAR105
26 Adaptor Bar 12 ½” PH BAR125
27 Adaptor Bar 20 ¾” 3 slot PH BAR2075
23-27 Complete Set of Adaptor Bars PH BAR0100
28 Scrap Pan 1/3 size 2 ½” deep HD PAN037
29 Ball Valve, 1 1/2” PVC Female PB VLV9901
30 Pipe, 1 1/2” PVC PB PIP150
31 Elbow, 1 1/2” PVC Fem x Glue PB ELB9905
32 Fan Register, Middle RP REG0508
33 Fan Shroud, Rail RP SHD0510
34 Fan Mounting Bracket for Base Coil Assembly RP SHD107
35 Mounting Support for Base Coil Assembly RP SPT0500
36 Evaporator Fan Motor EL MTR2338
37 Dial Temperature Control for Base HD CNT200
38 Plastic Bottom for Base Coil Assembly Box RP DRP107