R&S EM510 - Page 106

EM510 SENSe Subsystem:FREQuency
4065.7763.32-01.00 5.70
. :FREQuency
. . :AFC <Boolean>
Switching on/off the AFC function.
Parameters:
ON AFC function on
OFF AFC function off
*RST state:
OFF
Example:
SENSe:FREQuency:AFC ON
. . :AFC?
Query about the AFC function
Parameters:
none
Result:
AFC function on 1
AFC function off 0
Example:
SENSe:FREQuency:AFC? -> 1
. . [:CW|FIXed] <numeric_value>|UP|DOWN|MINimum|MAXimum
Setting the receiver frequency.
Parameters:
<numeric_value> frequency value
UP|DOWN increase|decrease of receiver frequency by the value set by
command SENS:FREQuency[:CW|FIX]:STEP[:INCRement]
MINimum|MAXimum sets the lowest|highest receiver frequency
*RST state:
801 kHz
Example:
FREQuency 801 kHz