R&S EM510 - Page 109

SENSe Subsystem:FREQuency EM510
5.73 4065.7763.32-01.00
. . . :SPAN? [MINimum|MAXimum]
Query about the display range of the panorama scan.
Parameters:
none query about the current display range
MINimum|MAXimum query about the smallest/widest display range
Result:
Frequency value in Hz
Example:
FREQuency:PSCan:SPAN? -> 2000000
. . . :STARt <numeric_value>|MINimum|MAXimum
Setting of the start frequency of the panorama scan.
Parameters:
<numeric_value> frequency value
MINimum|MAXimum setting of the lowest/highest start frequency
*RST state:
1 MHz
Example:
FREQuency:PSCan:STARt 1.5 MHz
. . . :STARt? [MINimum|MAXimum]
Query about the start frequency of the panorama scan.
Parameters:
none query about the current start frequency
MINimum|MAXimum query about the lowest/highest start frequency
Result:
Frequency value in Hz
Example:
FREQuency:PSCan:STARt?  1500000