R&S EM510 - Page 78

EM510 MEMory Subsystem
4065.7763.32-01.00 5.42
. :CONTents <name>,<mem_paras>|<packed_struct>
Loading a memory location.
As an alternative to the parameter field (<mem_paras>) a <Definite Length Block> can be
transferred with binary data.
Parameters:
<name> MEM0 to MEM9999 | RX | CURRENT | NEXT
<mem_paras> <F>, <THR>, <DEM>, <BW>, <ANT>, <ATT>, <ATTA>,
<SQUC>, <AFC>, <ACT>
<F> frequency (see SENS:FREQ:CW)
<THR> squelch threshold (see OUTP:SQU:THR)
<DEM> type of demodulation (see SENS:DEM)
<BW> bandwidth (see SENS:BWID)
<ANT> antenna number (see ROUT:SEL)
<ATT> attenuator (see INP:ATT)
<ATTA> attenuator auto (see INP:ATT:AUTO)
<SQUC> squelch function (see OUTP:SQU:STAT)
<AFC> AFC function (see (SENS:FREQ:CW:AFC)
<ACT> setting/resetting the memory to scan (ON/OFF or
1/0)