R&S EM510 - Page 85

OUTPut Subsystem EM510
5.49 4065.7763.32-01.00
. :FILTer:MODE?
Query about the activated audio filter mode.
Parameters:
none
Result:
OFF no filter function
NOTC automatic elimination of interference signals
NR noise reduction filter
BP bandpass filter 300 Hz to 3.3 kHz
Example:
OUTPut:FILTer:MODE? ->NOTC
. :FPDP:MODE IF|DEModulator|PANorama
With this switch the kind of data is determined that is output via the FPDP interface.
Parameters:
IF IQ data, digital IF data (before the demodulation)
( see also: SYSTem:FPDP:REMote:MODE )
DEModulator video streaming data (after the demodulation), 2-channelled
PANorama IQ data from the panorama path
Depending on the selected demodulation mode, DEModulator results in the following output:
Demodulation mode FPDP A FPDP B
AM, FM, PULSE AM FM
PM AM PM
USB I Q
LSB I Q
CW I Q
IQ I Q
ISB I Q
The format of the IQ data (IF and PANorama) is set with command SYSTem:FPDP:REMote:MODE.
*RST-state:
IF
Example:
OUTPut:FPDP:MODE PANorama