R&S EM510 - Page 86

EM510 OUTPut Subsystem
4065.7763.32-01.00 5.50
. :FPDP:MODE?
Query about the kind of data that is output via the FPDP interface.
Parameters:
none
Result:
IF IQ data, digital IF data (before the demodulation)
(see also: SYSTem:FPDP:REMote:MODE )
DEM video streaming data (after the demodulation), 2-channelled
PAN IQ data from the panorama path
Example:
OUTPut:FPDP:MODE? ->PAN
:SQUelch
. . [:STATe] <Boolean>
Switch on/off of squelch.
Parameters:
ON squelch on
OFF squelch off
*RST state:
OFF
Example:
OUTPut:SQUelch ON
. . [:STATe]?
Query about squelch setting.
Parameters:
none
Result:
1 squelch on
0 squelch off
State:
OUTPut:SQUelch? -> 1