SENSe Subsystem :DEModulation EM510
5.63 4065.7763.32-01.00
. :DEModulation AM|FM|PULSe|PM|A0|IQ|ISB|A1|CW|LSB|USB
Switchover of type of demodulation.
Error message:
If the set bandwidth exceeds 9 kHz at CW, LSB and USB, an error -221,"Settings conflict" will
be generated if one of the SSB operating modes is to be switched on.
Parameters:
FM switch on FM demodulator
AM switch on AM demodulator
PULSe switch on pulse demodulator
PM switch on PM demodulator
IQ or A0 switch on IQ demodulator
ISB switch on ISB demodulator
CW or A1 switch on SSB demodulator 1 kHz beat
USB switch on SSB demodulator upper sideband
LSB switch on SSB demodulator lower sideband
*RST state:
AM
Example:
DEModulation FM
. :DEModulation?
Query about the demodulation type.
Parameters:
none
Result:
FM, AM, PULS, PM, IQ, ISB, CW, USB, LSB
Example:
DEModulation? -> FM
To Next Page
Loading...
