Operating Manual 1302.6163.12 - 03 4.73
R&S ESU Instrument Functions
Receiver Mode
DETECTOR
The DETECTOR softkey opens a submenu to select the detector.
The detector type is set for the trace scan and may be independently selected for
each trace.
For description of detector types see section “Selection of Detector” on page 4.137.
MAX PEAK The MAX PEAK softkey activates the max peak detector.
Remote command: DET POS
MIN PEAK The MIN PEAK softkey activates the min peak detector.
Remote command: DET NEG
QUASIPEAK The QUASIPEAK softkey selects the quasipeak detector.
The IF bandwidth is adapted as a function of the frequency range. The coupling of
the IF bandwidth to the frequency range can be cancelled using softkey CISPR
RBW UNCOUPLED.
Remote command: DET QPE
AVERAGE The AVERAGE softkey activates the average detector.
Remote command: DET AVER
RMS The RMS softkey activates the rms detector.
Remote command: :DET RMS
FINAL
MAX PEAK
The FINAL MAX PEAK selects the max peak detector for the final measurement.
Remote command: :DET:FME POS
FINAL
MIN PEAK
The FINAL MIN PEAK selects the min peak detector for the final measurement.
Remote command: :DET:FME NEG
FINAL
QUASIPEAK
The FINAL QUASIPEAK selects the quasipeak detector for the final measurement.
Remote command: :DET:FME QPE
FINAL
AVERAGE
The FINAL AVERAGE selects the average detector for the final measurement.
Remote command: :DET:FME AVER
FINAL
CISPR AV
The FINAL CISPR AV selects the weighting average detector according to CISPR
16-1 for the final measurement.
Remote command: :DET:FME CAV
FINAL
RMS
The FINAL RMS selects the rms detector for the final measurement.
Remote command: :DET:FME RMS
To Next Page
Loading...
