R&S ESU Series - Page 310

Operating Manual 1302.6163.12 - 03 4.279
R&S ESU Instrument Functions
Basic Settings
Selecting the GPIB Address
GPIB
The GPIB softkey opens a submenu for setting the parameters of the remote-control
interface.
Remote command: --
GPIB ADDRESS The GPIB ADDRESS softkey enables the entry of the GPIB address.
Valid addresses are 0 through 30. The default address is 20.
Remote command: SYST:COMM:GPIB:ADDR 20
ID STRING
FACTORY
The ID STRING FACTORY softkey selects the default response to the *IDN? query.
Remote command: --
ID STRING
USER
The ID STRING USER softkey opens an editor for entering a user-defined response
to the *IDN? query.
Max. length of output string: 36 characters
Remote command: --
TIME+DATE
CONFIGURE
NETWORK
COMPUTER NAME
IP ADDRESS
SUBNET MASK
DHCP ON | OFF
CONFIGURE
NETWORK
SHOW CONFIG
NETWORK LOGIN
OPTIONS
! INSTALL OPTION
REMOVE OPTION
Side menu
SOFT FRONTPANEL