Operating Manual 1302.6163.12 - 03 4.287
R&S ESU Instrument Functions
Basic Settings
CONFIGURE
NETWORK
The CONFIGURE NETWORK softkey opens the dialog box with the network set-
tings.
The softkey is used to modify an existing network configuration after the correspond-
ing tabs are selected (see the Quick Start Guide 6, “ LAN Interface”).
Remote command: --
SHOW CONFIG The SHOW CONFIG softkey shows the current network configuration.
NETWORK
LOGIN
The NETWORK LOGIN softkey opens the dialog box with the auto login settings.
Important:
The password was changed to ’123456’ with firmware version 4.5. For version < 4.5,
the password is ’instrument’.
When a network is installed, the preset user name 'instrument' and the password
123456' can be adapted to a new user (see the Quick Start Guide 6, “ LAN Inter-
face”.).
A PC keyboard with trackball (or mouse instead) is required for the installation/
configuration of the network support.
To Next Page
Loading...
