Operating Manual 1302.6163.12 - 03 4.1
R&S ESU Instrument Functions
4 Instrument Functions
4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5
4.2 R&S ESU Initial Configuration – PRESET Key . . . . . . . . . . . . . . . . . . . . . . 4.6
4.3 Mode Selection – Hotkey Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9
4.4 Return to Manual Operation – LOCAL Menu . . . . . . . . . . . . . . . . . . . . . . 4.10
4.5 Receiver Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11
4.5.1 Operation on a Discrete Frequency – FREQ Key . . . . . . . . . . . . . . . . . 4.14
4.5.2 Level Display and RF Input Configuration – AMPT Key . . . . . . . . . . . . 4.16
4.5.3 Setting the IF Bandwidth – BW Key . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.21
4.5.3.1List of Available Channel Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.23
4.5.4 Selection of the Measurement Function – MEAS Key . . . . . . . . . . . . . 4.25
4.5.4.1Selecting the Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.28
4.5.4.2Setting the Measurement Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.30
4.5.4.3AF Demodulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.33
4.5.4.4Data Reduction and Peak List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.33
4.5.4.5Automatic Final Measurement with Threshold Scan . . . . . . . . . . . 4.35
4.5.4.6Selection of Detectors for Final Measurement . . . . . . . . . . . . . . . . 4.46
4.5.5 Frequency Scan and Time Domain Scan – SWEEP Key . . . . . . . . . . . 4.51
4.5.5.1Stepped Scan in the Frequency Domain . . . . . . . . . . . . . . . . . . . . 4.51
4.5.5.2Time Domain Scan in the Frequency Domain . . . . . . . . . . . . . . . . 4.52
4.5.5.3Scan on a Fixed Frequency in the Time Domain . . . . . . . . . . . . . . 4.53
4.5.5.4Display of Measurement Results . . . . . . . . . . . . . . . . . . . . . . . . . . 4.54
4.5.5.5Entry of Scan Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.55
4.5.5.6Running a Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.62
4.5.6 Triggering the Scan – TRIG Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.63
4.5.7 Marker Functions – MKR Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.64
4.5.8 Change of Settings via Markers – MKR-> Key . . . . . . . . . . . . . . . . . . . 4.65
4.5.9 Marker Functions – MKR FCTN Key . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.69
4.5.10 Selection and Setting of Traces – TRACE Key . . . . . . . . . . . . . . . . . . 4.70
4.5.10.1Selection of Trace Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.71
4.6 IF Spectrum Analysis Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.77
4.6.1 Level Display and RF Input Configuration – AMPT Key . . . . . . . . . . . . 4.80
4.6.2 Markers and Delta Markers – MKR Key . . . . . . . . . . . . . . . . . . . . . . . . 4.82
4.6.3 Marker Functions – MKR FCTN Key . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.84
4.6.3.1Activating the Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.84
4.6.3.2Selecting the Trace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.84
4.6.4 Change of Settings via Markers – MKR-> Key . . . . . . . . . . . . . . . . . . . 4.85
4.6.5 Selection and Setting of Traces – TRACE Key . . . . . . . . . . . . . . . . . . . 4.90
4.6.5.1Selection of Trace Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.91