Operating Manual 1302.6163.12 - 03 4.305
R&S ESU Instrument Functions
Basic Settings
COPY The COPY softkey opens the help line editor to enter the target directory for a copy-
ing process. The file is also copied into the clipboard and can be copied into a differ-
ent directory at a later time by means of PASTE.
Files can also be copied to a different storage medium by indicating a certain drive
letter (e.g. D:). The selected files or directories will be copied after terminating the
entry with the ENTER key.
Remote command: MMEM:COPY "D:\user\set.cfg","a:"
RENAME The RENAME softkey opens the help line editor to rename a file or a directory (anal-
ogously to the COPY softkey).
Remote command: MMEM:MOVE "test02.cfg","set2.cfg"
CUT The CUT softkey shifts the selected file into the clipboard from where it can be cop-
ied into a different directory at a later time by means of PASTE.
Remote command: --
PASTE The PASTE softkey copies files from the clipboard to the current directory. The
directory is changed by means of the cursor keys and subsequent pressing of
ENTER or via the EDIT PATH softkey.
Remote command: --
The file in the output directory will only be deleted if the PASTE softkey has been
pressed.
To Next Page
Loading...
