R&S ESU Instrument Functions
External Generator Control – Option R&S FSP-B10
4.336 Operating Manual 1302.6163.12 - 03
CAL TRANS The CAL TRANS softkey triggers the calibration of the transmission measurement.
It starts a sweep that records a reference trace. This trace is then used to obtain the
differences to the normalized values.
Fig. 4.30 Calibration curve for transmission measurement
During the calibration the following message is displayed:
After the calibration sweep the following message is displayed:
This message is cleared after approx. 3 seconds.
Remote command: CORR:METH TRAN
To Next Page
Loading...
