R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
6.322 Operating Manual 1302.6163.12 - 03
FSE [SENSe<1|2>:]DDEMod:PSK:NSTate 2 | 8 not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:QAM:NSTate 16 not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:QPSK:FORMat NORMal | DIFFerential |
OFFSet | DPI4
not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SBANd NORMal | INVerse not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:PULSe:STATe ON | OFF not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:
CATalog?
not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:
COMMent
<string> not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:DATA <string> not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:NAME <string> not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:OFFSet <numeric_value> not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:PATTern <string> not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:SELect <string> not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:STATe ON | OFF not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SEARch:TIME 100 to 1600 not available for
R&S ESU
FSE [SENSe<1|2>:]DDEMod:SRATe 160 Hz to 1,6 MHz not available for
R&S ESU
FSIQ [SENSe<1|2>:]DDEMod:SRATe 160 Hz to 7 MHz not available for
R&S ESU
[SENSe<1|2>:]DDEMod:TIME 1 to Frame Length not available for
R&S ESU
FSET [SENSe<1|2>:]DEMod OFF | AM | AMVideo |
FM | PM
not available for
R&S ESU
ESIB [SENSe<1|2>:]DEMod OFF | AM | FM not available for
R&S ESU
FSET [SENSe<1|2>:]DEMod:FILTer:HPASs:FREQuency 0 Hz | 10 Hz | 100 Hz | 1
kHZ
not available for
R&S ESU
FSET [SENSe<1|2>:]DEMod:FILTer[:LPASs]:AUTO ON | OFF not available for
R&S ESU
FSET [SENSe<1|2>:]DEMod:FILTer[:LPASs]:
FREQuency
<numeric_value> not available for
R&S ESU
FSE [SENSe<1|2>:]DETector<1...4>:CMEM[:STATe] ON | OFF not available for
R&S ESU
Devices Command (Sheet 34 of 47) Parameter Notes