R&S ESU Series - Page 774

Operating Manual 1302.6163.12 - 03 6.335
R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
FSE/
ESIB
TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:
FRAMe
0 to 100s not available for
R&S ESU
FSE TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:
FRAMe:AUTO
ONCE not available for
R&S ESU and FSET
FSE TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:
SLOT
0 to 100s not available for
R&S ESU and FSET
FSE TRIGger<1|2>[:SEQuence]:SYNChronize:ADJust:
SLOT:AUTO
ONCE not available for
R&S ESU and FSET
FSE TRIGger<1|2>[:SEQuence]:SYNChronize:
SOURce
FRAMe | TSC not available for
R&S ESU and FSET
R&S
ESU
UNIT<1|2>:POWer DBM | DBPW | WATT |
DBUV | DBMV | VOLT |
DBUA | AMP | V | A | W
available units are
compatible to the FSE.
FSE/
FSIQ
UNIT<1|2>:POWer DBM | DBPW | WATT |
DBUV | DBMV | VOLT |
DBUA | AMP | DB | PCT
| UNITLESS |
DBUV_MHZ |
DBMV_MHZ |
DBUA_MHZ | DBUV_M |
DBIA_M | DBUV_MMHZ
| DBUA_MMHZ
for R&S ESU, the
following units apply:
DBM | DBPW | WATT |
DBUV | DBMV | VOLT |
DBUA | AMP | V | A | W
FSET/
ESIB
UNIT<1|2>:POWer DBM | DBPW | DBPT |
WATT | DBUV | DBMV |
VOLT | DBUA | AMPere |
V | W | DB | PCT |
UNITLESS |
DBUV_MHZ |
DBMV_MHZ |
DBUA_MHZ | DBUV_M |
DBIA_M | DBUV_MMHZ
| DBUA_MMHZ
for R&S ESU, the
following units apply:
DBM | DBPW | WATT |
DBUV | DBMV | VOLT |
DBUA | AMP | V | A | W
FSE UNIT<1|2>:PROBe ON | OFF not available for
R&S ESU
Devices Command (Sheet 47 of 47) Parameter Notes