Instrument control
R&S
®
LCX Series
45Getting Started 1179.2254.02 ─ 03
The initial screen shows the basic parameters capacitance "C
s
" and serial resist-
ance "R
s
", the impendance "Z" and phase angle "Θ
d
". On the right, the R&S LCX
displays the measurement readings.
You can select parameters different from default by tapping the parameter soft-
keys.
How to: see "Measuring a resistor" on page 36
The parameter softkeys open an on-screen selection list for selecting parameters
other than displayed.
6.2.1.8 Additional display characteristics
The following section provides a short insight on the indication of the screen in
general, and significant elements that you see under specific operating modes, in
dialogs or settings.
●
Appearance of active elements
– Active elements like On/Off switches, state buttons have a blue back-
ground.
– Selected elements are framed or highlighted orange.
– Inactive elements are gray.
●
Menus and dialogs
Both, menus and dialogs appear similar, and contain selection lists.
Throughout this manual, a list of functions which lead you to the settings of
this function is referred to as menu. The term dialog refers to the views that
cover the parameters of a certain function. Some dialogs are divided into tabs
with logically grouped parameters.
Means of manual interaction
To Next Page
Loading...
Need help?
General
