R&S NRT-Z14 - Page 21

Power sensor tour
R&S
®
NRT-Z14/44
21Getting Started 1443.8632.02 ─ 01
Prerequisites
●
The USB port of the computer must be capable to supply at least 500 mA. If
necessary, use a self-powered USB hub.
●
The drivers for the R&S NRT‑Z5 USB interface adapter are installed on the
computer.
To install the drivers for the R&S NRT‑Z5 USB interface adapter
► Proceed as described in the technical information delivered with the
R&S NRT‑Z5 USB interface adapter.
For a detailed setup, see Chapter 3.5.1, "Computer", on page 16.
R&S NRT‑Z5 USB interface adapter