R&S NRT-Z14 - R&S Virtual NRT

Operating concepts
R&S
®
NRT-Z14/44
24Getting Started 1443.8632.02 ─ 01
5.2 R&S Virtual NRT
R&S Virtual NRT is a Windows application provided by Rohde & Schwarz for con-
trolling the R&S NRT-Zxx. R&S Virtual NRT provides a graphical user interface
supporting:
●
Manual operation of the main measurements. For information on the graphical
user interface, see the R&S Virtual NRT help.
●
Remote control, see Chapter 5.3.1, "Remote control using R&S Virtual NRT",
on page 26.
Installing the program
R&S Virtual NRT is provided on the Rohde & Schwarz website as a separate
standalone installation package,
https://www.rohde-schwarz.com/software/nrt-z_nap-z/.
► Save the EXE file on your computer.
Required equipment
●
R&S NRT-Zxx power sensor
●
R&S NRT‑Z5 USB interface adapter to connect the power sensor to the com-
puter; alternatively, you can use a legacy adapter, see Chapter 3.5.3, "Legacy
setups", on page 18.
●
Computer with Microsoft Windows operating system and the drivers for the
R&S NRT‑Z5 USB interface adapter installed, see "To install the drivers for
the R&S NRT‑Z5 USB interface adapter" on page 21.
Setup
2
3
1
4
5
Figure 5-2: Setup for R&S Virtual NRT
R&S Virtual NRT