R&S RTO - Page 396

Software and Network Operation
R&S
®
RTO
380User Manual 1316.0827.02 ─ 06
The R&S RTO complies with LXI Class C. In addition to the general class C features
described above, it provides the following LXI-related functionality:
●
Integrated "LXI Configuration" dialog box for LXI activation and reset of the LAN con-
figuration (LAN Configuration Initialize, LCI).
Firmware update
After a firmware update, shut-down and re-start the instrument in order to enable the full
LXI functionality.
14.4.2.2 LXI Configuration
The "LXI" tab of the "Setup" dialog box provides basic LXI functions and information for
the R&S RTO.
Default state of the network settings
"Reset" initiates the network configuration reset mechanism (LCI) for the instrument.
According to the LXI standard, an LCI must set the following parameters to a default state.
Parameter Value
TCP/IP Mode DHCP + Auto IP Address
Dynamic DNS Enabled
ICMP Ping Enabled
Password for LAN configuration LxiWebIfc
The LAN settings are configured using the instrument's LXI Browser Interface.
Operation in a Network