R&S RTO - Page 495

Remote Control
R&S
®
RTO
479User Manual 1316.0827.02 ─ 06
Suffix Trigger type
3 WIDTh
4 RUNT
5 WINDow
6 TIMeout
7 INTerval
8 qualification is not supported (SLEWrate)
9 qualification is not supported (DATatoclock)
10 PATTern
11 qualification is not supported (ANEDge)
12 currently not used
13 currently not used
14 qualification is not supported (SERPattern)
15
qualification is not supported (MSOState, option R&S RTO-B1)
TRIGger<m>:QUALify<n>:STATe....................................................................................479
TRIGger<m>:QUALify<n>:A[:ENABle]..............................................................................480
TRIGger<m>:QUALify<n>:B[:ENABle]..............................................................................480
TRIGger<m>:QUALify<n>:C[:ENABle]..............................................................................480
TRIGger<m>:QUALify<n>:D[:ENABle]..............................................................................480
TRIGger<m>:QUALify<n>:A:LOGic..................................................................................480
TRIGger<m>:QUALify<n>:B:LOGic..................................................................................480
TRIGger<m>:QUALify<n>:C:LOGic.................................................................................480
TRIGger<m>:QUALify<n>:D:LOGic.................................................................................480
TRIGger<m>:QUALify<n>:AB:LOGic................................................................................481
TRIGger<m>:QUALify<n>:CD:LOGic...............................................................................481
TRIGger<m>:QUALify<n>:ABCD:LOGic...........................................................................481
TRIGger<m>:QUALify<n>:STATe <AddTrigLogic>
Enables the use of the qualification definition for the selected trigger event.
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event, 2 = B-event.
<n> 1..15
Defines the trigger type, see table 16-13.
Command Reference