R&S RTO6 - Page 1900

Remote control commands
R&S
®
RTO6
1900User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<Threshold> Range: -12 to 12
Increment: 0.1
*RST: 1.65
Default unit: V
BUS<m>:SENT:TECHnology <Technology>
Selects the threshold voltage.
Suffix:
<m>
.
1..4
Selects the serial data bus.
Parameters:
<T
echnology> V25 | MANual
V25
The threshold value is 2.5 V
, according to CMOS technology
.
MANual
Sets the threshold to the value set with BUS<m>:SENT:DATA:
THReshold.
*RST: V25
BUS<m>:SENT:CLKPeriod <ClockPeriod>
Sets the nominal clock period (clock tick).
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ClockPeriod> Range: 1E-6 to 100E-6
Increment: 1E-6
*RST: 6E-6
Default unit: s
BUS<m>:SENT:CLKTolerance <ClockT
olerance>
Sets a tolerated deviation of the clock signal.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols