R&S RTO6 - Page 2070

Remote control commands
R&S
®
RTO6
2070User Manual 1801.6687.02 ─ 05
BUS<m>:RFFE:SEQuence<n>:TYPE?..........................................................................
2071
BUS<m>:RFFE:
SEQuence<n>:SADD?..........................................................................2072
BUS<m>:RFFE:SEQuence<n>:ADDRess?.....................................................................2072
BUS<m>:RFFE:SEQuence<n>:BCOunt?....................................................................... 2072
BUS<m>:RFFE:SEQuence<n>:DATA?...........................................................................2073
BUS<m>:RFFE:SEQuence<n>:SYMBol?....................................................................... 2073
BUS<m>:RFFE:SEQuence<n>:PADone?....................................................................... 2073
BUS<m>:RFFE:SEQuence<n>:PADZero?......................................................................2073
BUS<m>:RFFE:SEQuence<n>:PCTRl?......................................................................... 2074
BUS<m>:RFFE:SEQuence<n>:RBTRate?......................................................................2074
BUS<m>:RFFE:SEQuence<n>:WBTRate?.....................................................................2074
BUS<m>:RFFE:SEQuence<n>:BYTE<o>:NAME?...........................................................2075
BUS<m>:RFFE:SEQuence<n>:BYTE<o>:STATe?...........................................................2075
BUS<m>:RFFE:SEQuence<n>:BYTE<o>:VALue?.......................................................... 2075
BUS<m>:RFFE:FCOunt?
Returns the number of command sequences in the current acquisition.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:STATe?
Returns the overall state of the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<FrameState> OK | SSC | VERSion | PARity | LENGth | BPERR | GAP |
NORESPONSE | INComplete
OK: the sequence is valid.
SSC: SSC error
.
VERSion: RFFE version.
PARity: parity error
.
LENGth: length error.
BPERR: bus park error.
NORESPONSE: No response.
INComplete: The sequence is not completely contained in the
acquisition. The acquired part of the sequence is valid.
*RST: OK
Protocols