R&S RTO6 - Page 2150

Remote control commands
R&S
®
RTO6
2150User Manual 1801.6687.02 ─ 05
Parameters:
<ThresholdDplus> Range: -5 to 5
Increment: 0.01
*RST: 1.55
Default unit: V
BUS<m>:USB:DMINus:THReshold <ThresholdDminus>
Defines the threshold level for the D- data signal (in USB low speed and USB full
speed protocol, only).
Suffix:
<m>
.
1..4
Parameters:
<ThresholdDminus> Range: -5 to 5
Increment: 0.01
*RST: 1.55
Default unit: V
BUS<m>:USB:DIFFerential:THReshold <ThresDiff>
Defines the threshold level for the dif
ferential signal in the USB high speed protocol.
Suffix:
<m>
.
1..4
Parameters:
<ThresDiff> Range: -2 to 2
Increment: 0.01
*RST: 0
Default unit: V
BUS<m>:USB:DATA:THReshold <ThresholdData>
Defines the threshold level for the data signal in the USB HSIC protocol.
Suffix:
<m>
.
1..4
Parameters:
<ThresholdData> Range: -2 to 2
Increment: 0.01
*RST: 0.65
Default unit: V
BUS<m>:USB:STRobe:THReshold <ThresholdStrobe>
Defines the threshold level for the strobe signal in the USB HSIC protocol.
Suffix:
<m>
.
1..4
Protocols