R&S RTO6 - Page 2474

Remote control commands
R&S
®
RTO6
2474User Manual 1801.6687.02 ─ 05
Parameters:
<IQInputMode> BASeband | RFIF
Baseband or intermediate frequency (RFIF)
*RST: BASeband
Usage: Asynchronous command
IQ:RBWidth <RelBw>
Sets the bandwidth factor to define the filter bandwidth.
Filter BW = Relative BW * Sample rate
Parameters:
<RelBw> Range: 0.04 to 0.8
Increment: 0.01
*RST: 0.8
Usage: Asynchronous command
IQ:BWIDth?
Returns the filter bandwidth.
See also: IQ:
RBWidth
on page 2474
Return values:
<AbsBw> Range: 40 to 8E+9
*RST: 4E+9
Default unit: Hz
Usage: Query only
Asynchronous command
IQ:SRATe <SampleRate>
Sets the required sample rate of the output I/Q data.
Parameters:
<SampleRate> Range: 1 to 10E+9
Increment: 1
*RST: 10E+9
Default unit: Sa/s
Usage: Asynchronous command
IQ:RLENgth <RecordLength>
Sets the required record length of the output I/Q data. The resulting acquisition time of
the I/Q data is:
Acquisition time = Record length / Sample rate
I/Q software interface (option R&S RT
O6-K11)