R&S RTO6 - Page 588

Protocol analysis
R&S
®
RTO6
588User Manual 1801.6687.02 ─ 05
"Identifier +
Data"
Sets the trigger to a combination of identifier and data condition. The
instrument triggers at the end of the last byte of the specified data
pattern.
The identifier conditions are the same as for the "Identifier" trigger
type, see "Identifier setup: Condition, Identifier min, Identifier max"
on page
590. Data conditions are set with "Data setup: DLC, NDB,
Transfer, Condition, Data min, Data max" on page 591.
"Error condi-
tion"
Identifies various errors in the frame, see "Error conditions
"
on page
592.
CAN and CAN FD (option R&S RT
O6-K520)