R&S ZNA50 - Menu Bar

Operating the instrument
R&S
®
ZNA
40Getting Started 1178.6456.02 ─ 18
Figure 5-2: Scale softtool
A softtool is a tabbed panel with a close icon. When the softtool is closed, the close
icon is replaced by a "hamburger" icon. The latter allows you to reopen the softtool.
Some controls on the softtool tabs allow you to read and modify settings (e.g. "Ref
Value" in the screenshot above), some perform actions (e.g. "Auto Scale Trace"), while
others open additional dialogs (button label ends with "...").
5.2.4 Menu bar
You can also access the analyzer functions via textual menus. The menu bar is located
below the diagram area:
As in any Windows
®
application, menus can be controlled with the touchscreen or a
mouse. A short tap (left mouse click) expands a menu or submenu. If a menu com-
mand has no submenu assigned, a short tap (left mouse click) opens a dialog or
directly activates the menu command. When a (sub)menu is selected, the R&S ZNA
displays the corresponding softtool.
Overview of menu functions
●
The "File" menu provides functions to handle recall sets and trace files, to print or
save diagram content, and to shut down the VNA application.
●
The "Trace" menu provides all trace settings, the limit check settings, and the
marker functions including marker search.
Control elements of the application window