Operating the instrument
R&S
®
ZNA
42Getting Started 1178.6456.02 ─ 18
Example: "Max" sets the active marker to the maximum of the active trace.
5.2.6 Hardkey panel
The (virtual) "Hard Key" panel displays the control window's function keys inside the
main application window. For a short description of the function keys, refer to section
Chapter 4.1.1.2, "Control window: function keys", on page 26.
The "Hard Key" panel is particularly useful if the analyzer is controlled from an external
monitor or Remote Desktop.
For the R&S ZNA, it is hidden by default. In "Single Window Mode", it is visible (see
Chapter 5.6.1, "Dual-window mode vs. single-window mode", on page 51).
You can display the "Hard Key" panel using one of the following methods:
●
Select System – [Display] > "View Bar" > "Hard Key Panel".
●
Select "Display"> "View Bar" > "Hard Key Panel On" from the menu bar.
●
Select "Hard Key" from the context menu of the softtool panel.
Control elements of the application window
To Next Page
Loading...
