GUI reference
R&S
®
ZNA
421User Manual 1178.6462.02 ─ 20
"Magnitude -
Phase"
Perform averaging of magnitude and phase (default) of the complex
trace value.
Real - Imag
Perform averaging of the real and imaginary part of the complex trace
value (i.e. over the complex value itself).
Remote command:
CALCulate<Chn>:IAVerage:MODE
5.5.11 Trace Data tab
Stores one or several data or memory traces to a file or loads a memory trace from a
file.
Background information
Refer to Chapter 4.4.2, "Trace files", on page 149.
All buttons on the "Trace Data" tab serve as "openers" for related dialogs:
●
"Import..." calls up a dialog to load a memory trace from a trace file; see Chap-
ter 5.5.11.1, "Import Complex Data dialog", on page 422.
●
The buttons in the "Export snp Files" section call up a dialog to store data or mem-
ory traces to a trace file of the corresponding content and file format; see Chap-
ter 5.5.11.2, "Export Data - <File Type> dialog", on page 423
●
"snp Free Config..." opens a dialog to define the port assignment for the created
Touchstone (*.s<n>p) file. See Chapter 5.5.11.4, "Select Ports dialog",
on page 427.
Traces softtool
To Next Page
Loading...
