GUI reference
R&S
®
ZNA
690User Manual 1178.6462.02 ─ 20
5.14.7 Balanced tab
Selects 4-port transformation networks for balanced port deembedding/embedding,
defines their parameters, assigns them to a balanced port and enables embedding.
Use the complementary dock widget to create Balanced panel and to activate or deac-
tivate dembedding/embedding for selected balanced ports (see Chapter 5.14.1.5, "Bal-
anced panel", on page 657).
Background information
Refer to the section Chapter 4.6.2.10, "Combining Several de-/embedding networks",
on page 217.
Figure 5-44: Offset Embed > Balanced softtool
left = 4 port data file selected for de-/embedding
right = other network selected for de-/embedding
If the "Fixture Simulator" is disabled for the related channel (see "Fixture Simulator"
on page 600), this tab is inactive, i.e. all controls except the "Overview" button are
grayed out.
Overview
See "Overview" on page 662.
Offset Embed softtool
To Next Page
Loading...
