9
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety meas-
ures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazard-
ous situation.
5) S ERVICE
a) Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
BATTERY GLUE GUN SAFETY
WARNINGS
WARNING:
– This tool must be placed on its stand or
foot when not in use.
– A fire may result if the appliance is not used
with care, therefore
• be careful when using the appliance in plac-
es where there are combustible materials;
• do not apply to the same place for a long
time;
• do not use in presence of an explosive at-
mosphere;
• be aware that heat may be conducted to
combustible materials that are out of sight;
BGX7_Manual_East_95x125_20191203.indd 9 2019/12/3 上午11:28
To Next Page
Loading...
