EasyManua.ls Logo

Rapid EG111 - Safety Instructions; General Safety Precautions; Repair and Disposal Recommendations; Maintenance Procedures

Rapid EG111
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
READ CAREFULLY BEFORE
USING THE GLUE GUN.
HOT SURFACES (the glue
and the nozzle of the gun can
reach temperatures ranging from
150 to 200°C (depending on
the model used) Avoid all skin
contact. If burnt, plunge the
burn under cold water. Children
should only use the gun in the
presence of an adult.
DO NOT use the gun in damp
or wet conditions or expose it to
rain.
UNPLUG the gun from the wall
socket when not in use.
NEVER put any object in the
gun other than the glue sticks
recommended.
NEVER take a glue stick out
once it has been put into the
gun: the resulting damage may
be irreparable.
NEVER pull the cord to unplug
the glue gun.
WARNING : This tool must be
placed on its stand when not in
use.
THIS appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory and mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
RECOMMENDATIONS
-REPAIRS
If the power supply cable is
damaged it must be replaced
by the manufacturer, the
manufacturers after sales
service or a similarly qualified
person in order to avoid any
danger.
Should you wish to dispose of
the tool always used recognized
and dedicated recycling station
or green collection point.
MAINTENANCE
UNPLUG the tool before any
maintenance
CLEAN the tool by a dry or
damp cloth. NEVER use any
solvent.
DO NOT oil or grease any parts.
BE sure the tool is not damaged.
Replace or repair prior to use.
AUFMERKSAM VOR BENUT-
ZUNG DES APPARATS LESSEN
HEISSE OBERFLACHEN (die
Düse des Apparats und der
Klebstoff konnen Temperaturen
zwischen 150 und 200°C (je
EG111/G1000
SAFETY INSTRUCTIONS
EG111/G1000
SICHERHEITSHINWEISE

Related product manuals