EasyManua.ls Logo

RapidX XSCAPE - Emergency Instructions; Seat Belt Cutting Procedure; Window Breaking Procedure; Important Safety Notes

Default Icon
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EMERGENCY INSTRUCTIONS
A. In the event of an emergency,
the blade on the charger can be
used to cut through the seat belt.
1. Place the blade on the seat belt
and pull through the material
2. If necessary, repeat action until
seatbelt is completely cut
B. In the event that the doors are
inoperable, use the Safety Hammer
to break the driver or passenger
side windows.
1. Strike at each corner to crack
the window
2. Use caution when pushing
broken glass out of the
window frame
ATTENTION:
Only use Xscape Safety
Hammer & Seatbelt Cutter
in emergency situations
Disconnect USB devices before
using safety functions
Breaking glass may cause injury
Avoid looking directly at the
window while attempting to
break the glass
ONLY attempt to break the glass
at the corners of the windows.
The Safety hammer is sharp.
Use care not to cause unwanted
damage to surfaces that are
easily scratched
Xscape Dual USB with Safety
Hammer and Seatbelt Cutter is
NOT a toy (Not recommended
for use by children)
Do not disassemble Xscape
car charger
RapidX is not responsible for
harm or injury caused in the use
of this product

Related product manuals