Raritan DRX Series - DX2 Temperature and Humidity Sensors

Chapter 2: DX2 Series
9
Bracket installed onto the side of DX2-DH2C2:
DX2 Temperature and Humidity Sensors
There are four types of DX2 temperature and humidity sensor packages:
DX2-T1 , DX2-T1H1 , DX2-T2H1 , and DX2-T3H1 .
A DX2-T2H1 package contains one DX2-T1H1 and one DX2-T1 sensor.
A DX2-T3H1 package contains one DX2-T1H1 and two DX2-T1 sensors.
Depending on the DX2 temperature/humidity package you purchase, the
number of standard network patch cables shipped with a DX2
temperature/humidity sensor package varies.
The following diagram shows a DX2 temperature (and humidity) sensor
package.
Number Component Function
Two RJ-45 ports Connect a standard network patch cable
for either or both purposes below:
 Connect to the SENSOR port of a
Raritan product (like a PX3 PDU) or
Legrand PDU.
 Cascade DX2 sensor package(s).
See
Cascading DX2 Sensor Packages
(on page 17).
Status LED Indicate the sensor status. See
DX2 LED