Chapter 2: DX2 Series
11
LED states Description
High-speed flashing Sensor firmware is being updated.
DX2-CC2 Contact Closure Sensors
Raritan's contact closure sensor can detect the open-and-closed status
of connected detectors/switches.
There are two channels for connecting two discrete detectors/switches
(state: on/off).
Four termination points are available on this sensor: the two to the right
are associated with one channel, and the two to the left are associated
with the other.
Number Component Function
Two RJ-45 ports Connect a standard network patch cable
for either or both purposes below:
Connect to the SENSOR port of a
Raritan product (like a PX3 PDU) or
Legrand PDU.
Cascade DX2 sensor package(s).
See
Cascading DX2 Sensor Packages
(on page 17).
Two pairs of
termination points
Connect two discrete detectors/switches.
To Next Page
Loading...