Raritan DRX Series - Available DX Sensor Packages

Chapter 3: DX Series
20
Available DX Sensor Packages
Sensor packages Description
DX-D2C6
 7 pairs of terminals:
 2 for connecting dry contact signal
actuators (DC).
 5 for connecting contact closure sensors
(CC).
 1 hall effect sensor
Note: The hall effect sensor is reserved for future
use and currently shall NOT be used.
See DX-D2C6 (on page 21).
DX-PD2C5
7 pairs of terminals:
 2 for connecting powered dry contact signal
actuators.
 5 for connecting contact closure sensors.
See DX-PD2C5 (on page 24).
DX-PIR
 1 occupancy sensor
 1 tamper sensor
 1 pair of terminals for connecting contact
closure sensors
See
DX-PIR (on page 27).
DX-D4C3
7 pairs of terminals:
 4 for connecting dry contact signal actuators
(DC).
 3 for connecting contact closure sensors (CC).
See
DX-D4C3 (on page 29).
DX-VBR
 1 vibration sensor
 1 pair of terminals for connecting contact
closure sensors
See
DX-VBR (on page 32).
For detailed information on sensor names, see Sensor Naming
Conventions
(on page 80).
Tip -- other generations of contact closure sensors: